Manual

AT8901/2/3
AT8901/2/3 CLI Reference Manual Page 5 - 34
Default none
Format
client-name <name>
Mode DHCP Pool Config
5.9.3.1 no client-name
This command removes the client name.
Format
no client-name
Mode DHCP Pool Config
5.9.4 default-router
This command specifies the default router list for a DHCP client. {address1,
address2… address8} are valid IP addresses, each made up of four decimal bytes
ranging from 0 to 255. IP address 0.0.0.0 is invalid.
Default none
Format
default-router <address1> [<address2>....<address8>]
Mode DHCP Pool Config
5.9.4.1 no default-router
This command removes the default router list.
Format
no default-router
Mode DHCP Pool Config
5.9.5 dns-server
This command specifies the IP servers available to a DHCP client. Address parameters
are valid IP addresses; each made up of four decimal bytes ranging from 0 to 255. IP
address 0.0.0.0 is invalid.
Default none
Format
dns-server <address1> [<address2>....<address8>]
Mode DHCP Pool Config
5.9.5.1 no dns-server
This command removes the DNS Server list.
Format
no dns-server
Mode DHCP Pool Config
5.9.6 hardware-address
This command specifies the hardware address of a DHCP client. Hardware-address is
the MAC address of the hardware platform of the client consisting of 6 bytes in dotted
hexadecimal format. Type indicates the protocol of the hardware platform. It is 1 for 10
MB Ethernet and 6 for IEEE 802.