Manual

AT8901/2/3
AT8901/2/3 CLI Reference Manual Page 5 - 32
Multicast Count Current number of unsolicited multicast messages that have been
received and processed by the SNTP client since last reboot
5.8.10 show sntp client
This command is used to display SNTP client settings.
Format
show sntp client
Mode Privileged EXEC
Client Supported Modes
Supported SNTP Modes (Broadcast, Unicast, or Multicast).
SNTP Version The highest SNTP version the client supports
Port SNTP Client Port
Client Mode Configured SNTP Client Mode
Poll Interval Poll interval value for SNTP clients in seconds as a power of two.
Poll Timeout Poll timeout value in seconds for SNTP clients.
Poll Retry Poll retry value for SNTP clients.
5.8.11 show sntp server
This command is used to display SNTP server settings and configured servers.
Format
show sntp server
Mode Privileged EXEC
Server IP Address IP Address of configured SNTP Server
Server Type Address Type of Server.
Server Stratum Claimed stratum of the server for the last received valid packet.
Server Reference ID Reference clock identifier of the server for the last received
valid packet.
Server Mode SNTP Server mode.
Server Maximum Entries Total number of SNTP Servers allowed.
Server Current Entries Total number of SNTP configured.
For each configured server:
IP Address IP Address of configured SNTP Server.
Address Type Address Type of configured SNTP server.
Priority IP priority type of the configured server.
Ver si on SNTP Version number of the server. The protocol version used to
query the server in unicast mode.
Port Server Port Number
Last Attempt Time Last server attempt time for the specified server.
Last Update Status Last server attempt status for the server.
Total Unicast Requests Number of requests to the server.