Manual

AT8901/2/3
AT8901/2/3 CLI Reference Manual Page 5 - 28
5.7 Keying for Advanced Features
This section describes the commands you use to enter the licence key to access
advanced features. You cannot access the advanced features without a valid license
key.
5.7.1 license advanced
This command enables a particular feature. This command also enables the
corresponding show commands for a feature.
NOTE: If the feature is enabled, the feature is visible in the output of the
show
running-config command. The <key> parameter specifies the hexa-
decimal key for the feature.
Default none
Format
license advanced <key>
Mode Privileged EXEC
5.7.1.1 no license advanced
This command disables a particular feature. This command also disables the
corresponding show commands. The
<key> parameter specifies the hexadecimal key
for the feature.
Format
no license advanced <key>
Mode Privileged EXEC
<url> nvram:sslpem-
dhstrong
Downloads an HTTP secure-server cer-
tificate.
<url> nvram:sslpem-
root
Downloads an HTTP secure-server cer-
tificate.
<url> nvram:sslpem-
server
Downloads an HTTP secure-server cer-
tificate.
<url> nvram:startup-
config
Downloads the startup configuration
file to the system.
<url> nvram:system-
image
Downloads a code image to the system.
<url> {image1 |
image2}
Download an image from the remote
server to either image.
{image1 | image2} <url>
Upload either image to the remote
server.
image1 image2
Copy image1 to image2.
image2 image1
Copy image2 to image1.
Table 5.2. Copy Parameters
Source Destination Description