User guide

Management Commands AT8901M
AT8901M CLI Reference Manual Page 6 - 8
Mode
Line Config
6.3.4.1 no transport output telnet
Use this command to prevent new outbound Telnet connection from being established.
Format no transport output telnet
Mode Line Config
6.3.5 session-limit
This command specifies the maximum number of simultaneous outbound Telnet
sessions. A value of 0 indicates that no outbound Telnet session can be established.
Default 5
Format session-limit <0-5>
Mode Line Config
6.3.5.1 no session-limit
This command sets the maximum number of simultaneous outbound Telnet sessions to
the default value.
Format no session-limit
Mode Line Config
6.3.6 session-timeout
This command sets the Telnet session timeout value.The timeout value unit of time is
minutes. A value of 0 indicates that a session remains active indefinitely.
Default 0
Format session-timeout <0-160>
Mode Line Config
6.3.6.1 no session-timeout
This command sets the Telnet session timeout value to the default. The timeout value
unit of time is minutes.
Format no session-timeout
Mode Line Config
6.3.7 telnetcon maxsessions
This command specifies the maximum number of Telnet connection sessions that can
be established. A value of 0 indicates that no Telnet connection can be established. The
range is 0-5.
Default 5
Format telnetcon maxsessions <0-5>
Mode Privileged EXEC