User guide

Utility Commands AT8901M
AT8901M CLI Reference Manual Page 5 - 22
Mode Global Config
5.4.8 logging syslog
This command enables syslog logging. The <portid> parameter is an integer with a
range of 1-65535.
Default
disabled
Format logging syslog [port <portid>]
Mode Global Config
5.4.8.1 no logging syslog
This command disables syslog logging.
Format
no logging syslog
Mode Global Config
5.4.9 show logging
This command displays logging configuration information.
Format
show logging
Mode Privileged EXEC
Logging Client Local Port Port on the collector/relay to which syslog
messages are sent.
CLI Command Logging Shows whether CLI Command logging is enabled.
Console Logging Shows whether console logging is enabled.
Console Logging Severity Filter The minimum severity to log to the console
log. Messages with an equal or lower numerical severity
are logged.
Buffered Logging Shows whether buffered logging is enabled.
Syslog Logging Shows whether syslog logging is enabled.
Log Messages Received Number of messages received by the log process.
This includes messages that are dropped or ignored.
Log Messages Dropped Number of messages that could not be processed due
to error or lack of resources.
Log Messages Relayed Number of messages sent to the collector/relay.
5.4.10 show logging buffered
This command displays buffered logging (system startup and system operation logs).
Format
show logging buffered
Mode Privileged EXEC
Buffered (In-Memory) Logging Shows whether the In-Memory log is enabled
or disabled.
Buffered Logging Wrapping Behavior The behavior of the In Memory log
when faced with a log full situation.