User guide

AT8901M Utility Commands
Page 5 - 19 AT8901M CLI Reference Manual
5.3.19 show boardinfo led
This command displays the LED status.
Format
show boardinfo led
Mode Privileged EXEC
5.3.20 show boardinfo amc connection
This command displays the connections to an AMC carrier.
Format
show boardinfo amc connection {amcb1|amcb2}
show boardinfo amc connection all
Mode Privileged EXEC
5.3.21 show boardinfo amc fru
This command displays various FRU (field replaceable unit) related information (or all
FRU information) for a specified AMC.
Format
show boardinfo amc fru product-info {amcb1|amcb2}
show boardinfo amc fru board-info {amcb1|amcb2}
show boardinfo amc fru multi-record {amcb1|amcb2}
show boardinfo amc fru custom-area {amcb1|amcb2}
show boardinfo amc fru all {amcb1|amcb2}
Mode Privileged EXEC
5.3.22 show boardinfo amc ipmidev
This command displays the IPMI device information. This consists of Firmware
Revision, IPMI version, Manufacturer and Product ID.
Format
show boardinfo amc ipmidev
Mode Privileged EXEC
5.3.23 show boardinfo cpu-load
This command displays the CPU load. It shows the total time, the user time, the system
time and the idle time in current interval, 30 seconds interval and 5 minutes interval.
All times are reported in percent.
Format
show boardinfo cpu-load
Mode Priviliged EXEC
5.3.24 show boardinfo memory-usage
This command displays the memory usage. It shows malloc and kernel statistics as
well as system memory usage statistics
Format
show boardinfo memory-usage
Mode Priviliged EXEC