Owner's manual

Introduction
7 AT8404 User Guide
www.kontron.com
Interfaces
Backplane (Zone 2)
• Base channels 1 and 2: 1 x GbE (1000BASE-T)
• Fabric channels 1 and 2: 1 x 10 GbE (XAUI)
• Synchronization Clock: 2 x CLK 1/2/3 (A/B)
• Update channels 0-3: APS Path
RTM (Zone 3)
• 7 generic RTM channels from each AMC Slot
• 2 SAS/SATA/FC interfaces for mass storage
• 1 GbE interface to front board switch
• Serial port for Unit Computer management
• Fast Ethernet for Unit Computer management
• I2C IPMI connection
Front Panel • Serial port for Unit Computer management
General
Mechanical
• 8U form factor mechanically compliant to PICMG 3.0 and AMC.0
• Single slot (6HP)
• Up to four mid-size/single width AMC slots
• or up to two mid-size/double width AMC slots
• 280 mm x 322 mm (11.024“ x 12.677“)
• 150 mm cut away in AMC area
• Weight: 1.825 kg
Power Requirements
• Typical: 40W
• Maximum (4 AMCs and RTM): 210W
• AMCs may consume up to 140W
• Operating Voltage: -38 to -72 VDC
Temperature
Designed to meet or exceed the following (Characteristics without AMCs):
• Air Flow: 30 CFM min
• Operating: 0°C to +55°C (32°F to 131°F)
• Non-operating: -40°C to +70°C (-40°F to 158°F)
Table 1-2: AT8404 Main Specifications
AT8404 SPECIFICATIONS