User Manual

AT8402 Switching Commands
Page 2 - 67 AT8402 CLI Reference Manual
Modes Global Config
Interface Config
2.16.2 port-security max-dynamic
This command sets the maximum number of dynamically locked MAC addresses
allowed on a specific port.
Default 600
Format
port-security max-dynamic <maxvalue>
Mode Interface Config
2.16.2.1 no port-security max-dynamic
This command resets the maximum number of dynamically locked MAC addresses
allowed on a specific port to its default value.
Format
no port-security max-dynamic
Mode Interface Config
2.16.3 port-security max-static
This command sets the maximum number of statically locked MAC addresses allowed
on a port.
Default 20
Format
port-security max-static <maxvalue>
Mode Interface Config
2.16.3.1 no port-security max-static
This command sets maximum number of statically locked MAC addresses to the
default value.
Format
no port-security max-static
Mode Interface Config
2.16.4 port-security mac-address
This command adds a MAC address to the list of statically locked MAC addresses. The
<vid> is the VLAN ID.
Format
port-security mac-address <mac-address> <vid>
Mode Interface Config
2.16.4.1 no port-security mac-address
This command removes a MAC address from the list of statically locked MAC
addresses.
Format
no port-security mac-address <mac-address> <vid>
Mode Interface Config