User Manual

AT8402 Switching Commands
Page 2 - 39 AT8402 CLI Reference Manual
Mode Privileged EXEC
2.10.4 dot1x defaultlogin
This command assigns the authentication login list to use for non-configured users for
802.1x port security. This setting is over-ridden by the authentication login list
assigned to a specific user if the user is configured locally. If this value is not
configured, users will be authenticated using local authentication only.
Format
dot1x defaultlogin <listname>
Mode Global Config
2.10.5 dot1x initialize
This command begins the initialization sequence on the specified port. This command
is only valid if the control mode for the specified port is 'auto'. If the control mode is
not 'auto' an error will be returned.
Format
dot1x initialize <slot/port>
Mode Privileged EXEC
2.10.6 dot1x login
This command assigns the specified authentication login list to the specified user for
802.1x port security. The
<user> parameter must be a configured user and the
<listname> parameter must be a configured authentication login list.
Format
dot1x login <user> <listname>
Mode Global Config
2.10.7 dot1x max-req
This command sets the maximum number of times the authenticator state machine on
this port will transmit an EAPOL EAP Request/Identity frame before timing out the
supplicant. The
<count> value must be in the range 1 - 10.
Default 2
Format
dot1x max-req <count>
Mode Interface Config
2.10.7.1 no dot1x max-req
This command sets the maximum number of times the authenticator state machine on
this port will transmit an EAPOL EAP Request/Identity frame before timing out the
supplicant.
Format
no dot1x max-req
Mode Interface Config