User Manual

Switching Commands AT8402
AT8402 CLI Reference Manual Page 2 - 18
Mode Privileged EXEC
2.3.2 network mgmt_vlan
This command configures the Management VLAN ID.
Default 1
Format
network mgmt_vlan <1-4069>
Mode Privileged EXEC
2.3.2.1 no network mgmt_vlan
This command sets the Management VLAN ID to the default.
Format
no network mgmt_vlan
Mode Privileged EXEC
2.3.3 vlan
This command creates a new VLAN and assigns it an ID. The ID is a valid VLAN
identification number (ID 1 is reserved for the default VLAN). VLAN range is 2-4094.
Format
vlan <2-4094>
Mode VLAN Config
2.3.3.1 no vlan
This command deletes an existing VLAN. The ID is a valid VLAN identification
number (ID 1 is reserved for the default VLAN). The VLAN range is 2-4094.
Format
no vlan <2-4094>
Mode VLAN Config
2.3.4 vlan acceptframe
This command sets the frame acceptance mode per interface. For VLAN Only mode,
untagged frames or priority frames received on this interface are discarded. For Admit
All mode, untagged frames or priority frames received on this interface are accepted
and assigned the value of the interface VLAN ID for this port. With either option,
VLAN tagged frames are forwarded in accordance with the IEEE 802.1Q VLAN
Specification.
Default all
Format
vlan acceptframe {vlanonly | all}
Mode Interface Config
2.3.4.1 no vlan acceptframe
This command resets the frame acceptance mode for the interface to the default value.
Format
no vlan acceptframe
Mode Interface Config