User Manual

Utility Commands AT8402
AT8402 CLI Reference Manual Page 4 - 50
Backup Backup router IP address.
DB_DSCR packet field definitions:
MTU MTU
Options Options in the OSPF packet.
Flags Could be one or more of the following:
I – Init
M – More
MS – Master/Slave
Seq Sequence Number of the DD packet.
LS_REQ packet field definitions:
Length Length of packet.
LS_UPD packet field definitions.
Length Length of packet.
LS_ACK packet field definitions.
Length Length of packet.
4.10.11.1 no debug ospf packet
This command disables tracing of OSPF packets.
Format
no debug ospf packet
Mode Privileged EXEC
4.10.12 debug lacp packet
This command enables tracing of LACP packets received and transmitted by the
switch.
Default disabled
Format
debug lacp packet
Mode Privileged
A sample output of the trace message is shown below.
<15> JAN 01 14:04:51 10.254.24.31-1 DOT3AD[183697744]:
dot3ad_debug.c(385) 58 %% Pkt TX - Intf: 1/0/1(1), Type: LACP, Sys:
00:11:88:14:62:e1, State: 0x47, Key: 0x36
4.10.12.1 no debug lacp packet
This command disables tracing of LACP packets.
Format
no debug lacp packet
Mode Privileged EXEC