User Manual

AT8402 Utility Commands
Page 4 - 19 AT8402 CLI Reference Manual
Format show boardinfo led
Mode Privileged EXEC
4.3.20 show boardinfo fcap
This command shows the user changeable firmware capabilities.
Format
show boardinfo fcap
Mode Privileged EXEC
4.3.21 show boardinfo amc connection
This command displays the connections to an AMC carrier.
Format
show boardinfo amc connection {amcb1 | amcb2 | amcb3 | amcb4}
show boardinfo amc connection all
Mode Privileged EXEC
4.3.22 show boardinfo amc fru
This command displays various FRU (field replaceable unit) related information (or all
FRU information) for a specified AMC.
Format
show boardinfo amc fru product-info {amcb1 | amcb2 | amcb3 |
amcb4}
show boardinfo amc fru board-info {amcb1 | amcb2 | amcb3 |
amcb4}
show boardinfo amc fru multi-record {amcb1 | amcb2 | amcb3 |
amcb4}
show boardinfo amc fru custom-area {amcb1 | amcb2 | amcb3 |
amcb4}
show boardinfo amc fru all {amcb1 | amcb2 | amcb3 | amcb4}
Mode Privileged EXEC
4.3.23 show boardinfo amc ipmidev
This command displays the IPMI device information for a specified AMC. This
includes Firmware Revision, IPMI version, Manufacturer and Product ID.
Format
show boardinfo amc ipmidev {amcb1 | amcb2 | amcb3 | amcb4}
Mode Privileged EXEC
4.3.24 show boardinfo bootcycle
This command displays whether a bootcycle-detection is activated and (if activated)
the related parameters.
Format
show boardinfo bootcycle
Mode Priviliged EXEC
4.4 Logging Commands
This section describes the commands you use to configure system logging, and to view
logs and the logging settings.