Manual

59 AT8242
www.kontron.com
Table 4-39:AMC.0 Supported Commands for MMC
Table 4-40:HPM.1 Supported Commands for MMC
Get IPMB Link Info 3-68 PICMG 18h N/A No
Get Shelf Manager IPMB
Address
3-38 PICMG 1Bh N/A No
Set Fan Policy 3-89 PICMG 1Ch N/A No
Get Fan Policy 3-90 PICMG 1Dh N/A No
FRU Control Capabilities 3-29 PICMG 1Eh M Yes
FRU Inventory Device
Lock Control
3-42 PICMG 1Fh O No
FRU Inventory Device
Write
3-43 PICMG 20h O No
Get Shelf Manager IP
Addresses
3-36 PICMG 21h O No
Get Shelf Power
Allocation
3-85 PICMG 22h N/A No
Get Telco Alarm
Capability
3-93 PICMG 29h No
Set Telco Alarm State 3-94 PICMG 2Ah No
Get Telco Alarm State 3-95 PICMG 2Bh No
Get Telco Alarm Location 3-95 PICMG 39h No
Set FRU Extracted 3-25 PICMG 3Ah No
IPMI Spec. section NetFn CMD IPMI BMC req. Module MMC
req.
Kontron support
on MMC
AMC.0 Commands AMC.0 Table
Set AMC Port State 3-27 PICMG 19h O/M No
Get AMC Port State 3-28 PICMG 1Ah O/M No
Set Clock State 3-44 PICMG 2Ch O/M No
Get Clock State 3-45 PICMG 2Dh O/M No
IPMI Spec. section NetFn CMD IPMI BMC req. Module MMC
req.
Kontron support
on MMC
HPM.1 Commands HPM.1 Table
Get Target Upgrade
Capabilities
3-3 PICMG 2Eh No
Get Component
Properties
3-5 PICMG 2Fh No
Abort Firmware Upgrade 3-15 PICMG 30h No
IPMI Spec. section NetFn CMD IPMI BMC req. Module MMC
req.
Kontron support
on MMC