Manual

51 AT8242
www.kontron.com
Table 4-24:Carrier Information
4.4 Virtual MMC
4.4.1 Supported Commands
The tables below list the IPMI commands supported by both Virtual MMC instances. These tables are identical
as the ones provided by AMC.0. The last column states the Kontron support for the specific command.
Table 4-25:IPM Device Supported Commands for MMC
Carrier Activation and Power
Descriptor
7C28FFh
Local IPMB-L Address 7Ch
Maximum Module Current 28h (4 Amps at 12V => 48 Watts)
Reserved FFh
Field Value
Record Type ID C0h
Record Format Version 02h
Record Length *Calculated
Record Checksum *Calculated
Header Checksum *Calculated
Manufacturer ID 00315Ah (PICMG Record ID)
PICMG Record ID 1Ah (Carrier Information Table)
Record Format Version 00h
AMC.0 Extension Version 02h (AMC.0 R2.0)
Carrier Site Number Count 02h
Carrier Site Number 05h
Carrier Site Number 06h
IPMI Spec. section NetFn CMD IPMI BMC req. Module MMC
req.
Kontron support
on MMC
IPM Device "Global"
Commands    M M 
Get Device ID 20.1 App 01h M M Yes
Cold Reset 20.2 App 02h O O Yes
Warm Reset 20.3 App 03h O O No
Get Self Test Results 20.4 App 04h M O Yes
Field Value