Manual

39 AT8242
www.kontron.com
Table 4-17:HPM Commands
Get Fan Level 3-87 PICMG 16h O/M No
Bused Resource 3-62 PICMG 17h O/M Yes
Get IPMB Link Info 3-68 PICMG 18h O/M Yes
Get Shelf Manager IPMB
Address
3-38 PICMG 1Bh M No
Set Fan Policy 3-89 PICMG 1Ch M No
Get Fan Policy 3-90 PICMG 1Dh M No
FRU Control Capabilities 3-29 PICMG 1Eh M Yes
FRU Inventory Device
Lock Control
3-42 PICMG 1Fh M No
FRU Inventory Device
Write
3-43 PICMG 20h M No
Get Shelf Manager IP
Addresses
3-36 PICMG 21h M No
Get Shelf Power
Allocation
3-85 PICMG 22h M No
Get Telco Alarm
Capability
3-93 PICMG 29h O/M No
Set Telco Alarm State 3-94 PICMG 2Ah O/M No
Get Telco Alarm State 3-95 PICMG 2Bh O/M No
Get Telco Alarm Location 3-95 PICMG 39h O/M No
Set FRU Extracted 3-25 PICMG 3Ah M No
IPMI Spec. section NetFn CMD IPMI BMC req. Carrier IPMC
req.
Kontron support on
IPMC
HPM.1 Commands HPM.1 Table
Get Target Upgrade
Capabilities
3-3 PICMG 2Eh M Yes
Get Component
Properties
3-5 PICMG 2Fh M Yes
Abort Firmware Upgrade 3-15 PICMG 30h O Yes
Initiate Upgrade Action 3-8 PICMG 31h M Yes
Upload Firmware Block 3-9 PICMG 32h M Yes
Finish Firmware Upload 3-10 PICMG 33h M Yes
Get Upgrade Status 3-2 PICMG 34h O/M Yes
Activate Firmware 3-11 PICMG 35h M Yes
Query Self-Test Results 3-12 PICMG 36h O/M Yes
Query Rollback Status 3-13 PICMG 37h O/M Yes
Initiate Manual Rollback 3-14 PICMG 38h O/M Yes
IPMI Spec. section NetFn CMD IPMI BMC req. Carrier IPMC
req.
Kontron support on
IPMC