User Manual

57 AT8060
www.kontron.com
4.6.2.2 IPMC Health Indicator Sensor Aggregation
The following table shows the sensors involved in the health sensor aggregation.
Table 4-19: IPMC Health Indicator Sensor Aggregation Table
107 LAN Fabric0 Link Discrete
Fabric Interface 0 link status
Sensor type = 27h LAN
Reading type code = 6Fh Sensor Specific
Only offset 0,1 are used
See IPMI v2.0 table 42-3, Sensor type code 27h for sensor
definition
108 LAN Fabric1 Link Discrete
Fabric Interface 1 link status
Sensor type = 27h LAN
Reading type code = 6Fh Sensor Specific
Only offset 0,1 are used
See IPMI v2.0 table 42-3, Sensor type code 27h for sensor
definition
109 IPMI Info-1 Discrete
Internal Management Controller firmware diagnostic
Sensor type = C0h Kontron OEM Firmware Info
Event Reading type code = 70h Kontron OEM Internal Diagnostic
See OEM table, Sensor type code C0h (Kontron OEM Firmware
Info) for sensor definition and Event/Reading type code 70h
(Kontron OEM Internal Diagnostic)
110 IPMI Info-2 Discrete
Internal Management Controller firmware diagnostic
Sensor type = C0h Kontron OEM Firmware Info
Event Reading type code = 75h Kontron OEM Internal Diagnostic
See OEM table, Sensor type code C0h (Kontron OEM Firmware
Info) for sensor definition and Event/Reading type code 70h
(Kontron OEM Internal Diagnostic)
IPMI sensor ID Sensor Name
06 Temp Board Inlet
07 Temp AMC Outake
08 Temp CPU 0
09 Temp CPU 1
10 Temp VCORE 0
11 Temp VCORE 1
23 Brd Input Power
30 Vcc +12V SUS