User Manual

36 AT8060
www.kontron.com
Table 4-7:PEF and Alerting Supported Commands for IPMC
Table 4-8:Sensor Device Supported Commands for IPMC
IPMI Spec. section NetFn CMD IPMI BMC req. Carrier IPMC
req.
Kontron support
on IPMC
PEF and Alerting
Commands
O O
Get PEF Capabilities 30.1 S/E 10h M M Yes
Arm PEF Postpone Timer 30.2 S/E 11h M M Yes
Set PEF Configuration
Parameters
30.3 S/E 12h M M Yes
Get PEF Configuration
Parameters
30.4 S/E 13h M M Yes
Set Last Processed Event
ID
30.5 S/E 14h M M Yes
Get Last Processed Event
ID
30.6 S/E 15h M M Yes
Alert Immediate 30.7 S/E 16h O O No
PET Acknowledge 30.8 S/E 17h O O No
IPMI Spec. section NetFn CMD IPMI BMC req. Carrier IPMC
req.
Kontron support
on IPMC
Sensor Device
Commands
O M
Get Device SDR Info 35.2 S/E 20h O M Yes
Get Device SDR 35.3 S/E 21h O M Yes
Reserve Device SDR
Repository
35.4 S/E 22h O M Yes
Get Sensor Reading
Factors
35.5 S/E 23h O M No
Set Sensor Hysteresis 35.6 S/E 24h O O Yes
Get Sensor Hysteresis 35.7 S/E 25h O O Yes
Set Sensor Threshold 35.8 S/E 26h O O Yes
Get Sensor Threshold 35.9 S/E 27h O O Yes
Set Sensor Event Enable 35.10 S/E 28h O O Yes
Get Sensor Event Enable 35.11 S/E 29h O O Yes
Re-arm Sensor Events 35.12 S/E 2Ah O O No
Get Sensor Event Status 35.13 S/E 2Bh O O No
Get Sensor Reading 35.14 S/E 2Dh M M Yes
Set Sensor Type 35.15 S/E 2Eh O O No
Get Sensor Type 35.16 S/E 2Fh O O No