User Manual

10 AT8060
www.kontron.com
2.2 System Core
2.2.1 Processors (SandyBridge-EP Series)
• Built on 32 nanometer process technology.
• Six/Eight cores processor in 2011-land FCLGA.
• 32KB L1/core
• 256KB L2 / core
• Up to 20MB L3: Up to 2.5MB per core.
• Streaming SIMD Extension 4.1 and 4.2
• Integrated 4-channel DDR3 controller, DDR3-1600 memory with ECC
• Intel QuickPath interconnect links, 8.0/7.2 GT/s in each direction
• Intel 64 Bit Architecture
• Enhanced Intel SpeedStep Technology
• Intel Virtualization Technology (VT)
• Intel Hyper-Threading Technology (HT)
2.2.2 Intel Patsburg PCH
• Direct Media Interface (DMI) x4 lanes for communicating with CPU0
• SATA Gen3 up to 6Gbps, SAS Gen2 up to 3Gbps, USB
2.3 USB 2.0 Interfaces
The board embeds a USB controller in the PCH. This controller is compliant to USB 2.0. It provides two USB
ports on the face plate, two on the RTM and two ports are reserved for the eUSB SSD. Those ports can be used
for external storage and for booting.
USB supports Plug and Play and hot-swapping operations (OS level). These features allow USB devices to be
automatically attached, configured and detached, without reboot or running setup.
Signal Path:
- 2 USB 2.0 on front panel (J12, J13)
- 2 USB 2.0 on the RTM front panel
- 2 USB 2.0 onboard for the eUSB SSD