Manual

62 AT8050
www.kontron.com
Table 4-23: Carrier AMC.0
4.3.3.3 AMC Carrier Point-To-Point Connectivity Information
As defined in the AMC.0 specification, On-Carrier Device Ids are arbitrarily assigned to devices that
implement E-Key governed links. Remote resources, such as AMCs, use predefined Ids corresponding to their
Site Numbers. The following table gives the mapping between the devices and the corresponding Ids.
Table 4-24:Mapping between the devices and the corresponding Ids
The Carrier Point-To-Point Connectivity record gives the list of available point-to-point link paths between
On-Carrier Devices and AMC Sites. The record's content is given by the following table.
Table 4-25:Record's content
Field Value
Record Type ID C0h
Record format version 02h
Record Length *Calculated
Record Checksum *Calculated
Header Checksum *Calculated
Manufacturer ID 00315Ah (PICMG Record ID)
PICMG Record ID 0x1A (Carrier Information Table)
Record Format Version 00h
AMC.0 Extension Version 02h (AMC.0 R2.0)
Carrier Site Number Count 01h
Carrier Site Number 05h
Devices Resource Id
Intel IOH PCI-Express Root Complex Port 3 00h
Intel IOH PCI-Express Root Complex Port 8 01h
Intel ICH10 SATA Controller 02h
Intel 82576EB NC (front/rear) 03h
Onboard Fabric Channel 1 Switch 04h
Onboard Fabric Channel 2 Switch 05h
FPGA Based UART 06h
RTM (On-Carrier Virtual Device for RTM) 07h
AMC B1 (AMC Site Number 5) 85h
Field Value
Record Type ID C0h
Record format version 02h
Record Length *Calculated
Record Checksum *Calculated
Header Checksum *Calculated