Manual

Product Description
4 AT8050
www.kontron.com
* Designed to meet or exceed
IPMI Features
• Management Controller compliant IPMI v2.0 and design to meet CP-TA v1.1 compliancy.
• Remote control capability (power on-off /clean shutdown/warm reset/cold reset) via any IPMI
channels including LAN.
• Full speed 115200 bps Serial Over LAN (+LAN access to BIOS menu setup) and IPMI Over LAN
(IPMI v2.0) always available.
• Serial data caching and replay to ease software application troubleshooting and post mortem
analysis.
• BIOS Post Code error sent to chassis manager System Event Logging.
• Configurable automatic “clean ACPI shutdown” policy on disk storage deactivation (AMC or
RTM).
• Standard PCIe Hot Plug operation embedded with PICMG AMC/RTM activation.
• Robust IPMI firmware Update with rollover capability, without any payload impact (HPM.1).
• Override configuration for activation of the board/AMC/RTM without Shelf Manager
Intervention.
Supervisory
• Supports a system management interface (KCS interrupt driven) via an IPMI V2.0 compliant
controller.
• Standard IPMI Watchdog for all CPU running phase (BIOS execution / OS loading and running).
• IPMI Hardware system monitor (power/voltages), memory and all critical components
temperature is monitored.
• Extensive sensors monitoring (around 100 IPMI sensors) and event generation base on
thresholds and discrete reading.
OS Compatibility • Validated with: Red Hat Enterprise Linux V.5.2, WindRiver PNE Linux 2.0
Power Requirements
120 W* -38V @ -72V with 12GB of memory, no RTM & no AMC. Maximum of 225W
* The power consumption will vary depending on your product configuration (AMC, RTM & extra
memory)
Environmental
Temperature*
Operating: 0-55°C/32-131°F with 30CFM airflow
Storage and Transit: -40 to +70°C/-40 to 158°F
Environmental
Humidity*
Operating: 15% to 90% @55°C/131°F non-condensing
Storage and Transit: 5% to 95% @ 40°C/104°F non-condensing
Environmental Altitude*
Operating: 4,000 m / 13,123 ft
Storage and Transit: 15,000 m / 49,212 ft
Environmental Shock*
Operating: 3G each axis
Storage and Transit: 18G each axis
Environmental
Vibration*
Operating: 5-200Hz. 0.2G, each axis
Storage and Transit: 5Hz to 20Hz @ 1 m2/s3 (0.01g2 /Hz) (flat)
20Hz to 200Hz @ -3dB/oct (slope down)
Reliability
• Whole board protected by active breaker
• USB voltage protected by an active breakers
Safety / EMC
Meet or exceed:
• Safety: UL 60950-1; CSA C22.2 No 60950-1-03; EN 60950-1:2001; IEC60950-1
• EMI/EMC: FCC 47 CFR Part 15, Class B; CE Mark to EN55022/EN55024/EN300386
Warranty Two years limited warranty
Features Description