Manual

Product Description
3 AT8050
www.kontron.com
1.3 Board Specifications
Table 1-1: Board Specifications
Features Description
Processors
• Intel® Xeon® Quad-Core L5518 Processor (2.13 GHz, 8MB cache) (BIOS 3.00 and highier) or
Intel® Xeon® Six-Core L5638 Processor (2 GHz, 12MB cache)
• Passive heatsink
• Virtualization Technology supported
Chipset • Intel 5520 I/O Hub (IOH 36D) & Intel I/O Controller Hub (ICH10R)
Bus Interface
• CPU QuickPath Interconnect delivering up to 5.86 GT/s /lane
•PCIe
Expansion Slot
• 1 Mid-size AdvancedMC bay
• x4 PCI Express
• 2x1000Base-BX Ports common option
• Dual port SAS(with RTM)/SATA
• 1 RS232 link to RTM
System Memory
• Up to 48 GB on 6 latching sockets of VLP DDR-3 1066MHz RDIMM SDRAM
• ECC support, support S4EC/D4ED
• 3 DDR-3 channels, 2 DIMM per channel
Flash Memory
• Two redundant 1MB BIOS (Field software upgradeable)
• Roll back functionality controlled by IPMC
Storage
• 4 ports SAS/SATA available using RTM with the LSISAS1064e
• USB SSD Flash (many avaialble sizes) daughter board
• iSCSI
• SATA AMC with ICH10 controller
I/O
• Front Panel: Serial (RJ-45), 2 i82576 Management LAN (RJ-45), 2 USB
• PCIe Gen2 5Gb/s in Update Channel (AMC Carrier ATCA blade)
• Intel i82599 10Gb/s or 1Gb/s Ethernet Controller to Fabric Interface
• Intel i82576 1Gb/s to the Base Interface
• Management LAN can be used to provide 1000Base-BX interface to AMC P0 & P1, RTM SFPs or to
the Fabric Interface P0s
• Synchronisation Clocks Interface support
Board Specifications
• PICMG 3.0R3 / 3.1 option 9, option 2
• PICMG AMC.0R2 / AMC.1 type 4 / AMC.2 type E2 & type 4 / AMC.3
• PICMG HPM.1
•IPMI 2.0
BIOS Features
• AMI BIOS
• Warm reset support with memory protection for post-mortem analysis
• Save CMOS in SEEPROM option
• Boot from Ethernet PXE (Base and Fabric interfaces and management Lan)
• Boot from Ethernet iSCSI (Base and Fabric interfaces)
• Boot from SAS/SATA; and boot from USB 2.0 (Floppy, CD-ROM, Hard Disk)
• Diskless, Keyboard less, and battery less operation extensions
• System, video and LAN BIOS shadowing
• Robust BIOS flash Update with rollover capability (HPM.1)
• Field updateable BIOS
• Advanced Configuration and Power Interface (ACPI 1.0, 2.0 & 3.0)
• Console redirection to serial port (VT100)with CMOS setup access, and SOL (Serial over LAN)
• Event (correctable/uncorrectable ECC, POST errors); log support to IPMC