ADD2-LVDS KTD-00711-D Public User Manual Date: 2008-09-16 Page 1 of 13 User Manual for the 820950 ADD2-LVDS-Dual card 820953 ADD2-LVDS-Single card AGP Digital Display second generation card with Low Voltage Differential Signaling Transmitter Designed primarily for 986LCD-M family and KT965/Flex motherboards 820950 ADD2-LVDS-Dual 820953 ADD2-LVDS-Single Part no. PCB no. Ass. no.
ADD2-LVDS KTD-00711-D Public User Manual Date: 2008-09-16 Page 2 of 13 Document revision history. Revision Date By D C B A 0 th MLA MLA MLA MLA MLA Sept. 16 2008 Sept. 4th, 2007 Aug. 20th, 2007 Mar. 13th , 2007 Jan. 19th , 2007 Comment Page 7, “PWR connector” text improved. MB specific configuration added to Installation Guide. 820953 Picture added. Minor layout changes. Add ADD2-LVDS-Single Preliminary version. Copyright Notice: Copyright © 2007, KONTRON Technology A/S, ALL RIGHTS RESERVED.
ADD2-LVDS KTD-00711-D Public User Manual Date: 2008-09-16 Page 3 of 13 Life Support Policy KONTRON Technology’s PRODUCTS ARE NOT FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT DEVICES OR SYSTEMS WITHOUT EXPRESS WRITTEN APPROVAL OF THE GENERAL MANAGER OF KONTRON Technology A/S. As used herein: 1.
ADD2-LVDS KTD-00711-D Public User Manual Date: 2008-09-16 Page 4 of 13 Table of contents: INTRODUCTION ................................................................................................................................................5 MECHANICAL DRAWING.................................................................................................................................5 FUNCTIONAL DIAGRAM .........................................................................................
ADD2-LVDS KTD-00711-D Public User Manual Date: 2008-09-16 Page 5 of 13 Introduction • • • • • • • • • • • • • • • • • • Single or dual LVDS Transmitter each working as Single/Dual LVDS Transmitter up to 165Mpixels/s Panel fitting scalar-up scale to 1600x1200 Panel resolution up to 1920x1200 (@60Hz Frame Rate The ADD2-LVDS-Dual supported by KT965 Family The ADD2-LVDS-Single supported by KT965 and 986LCD-M Families LVDS low jitter PLL accepts spread spectrum input LVDS 18-bit and 24-bit output 2D dithe
ADD2-LVDS KTD-00711-D Public User Manual Date: 2008-09-16 Page 6 of 13 Functional Diagram ADD2-LVDS-Dual LVDS connector #1 (J1) LCDVCC 3.3V/5V Backlight power Backlight Invertion SDVO to LVDS Converter #1 SDVO-B Power Connector (PWR) (option) VBIOS I2C PROM (option) DIP-Switches (DIP-SW) LVDS connector #2 (J2) SDVO to LVDS Converter #2 SDVO-C PCI-Expressx16 connector SDVO Motherboard with multiplexed PCI-Expressx16/SDVO connector Note that VBIOS located in I2C is not used as default.
ADD2-LVDS KTD-00711-D Public User Manual Date: 2008-09-16 Page 7 of 13 Connector Position J1 PWR DIP-SW J2 (PCI-Expressx16 Edge Connector) PWR = Power Connector for adding power if required DIP-SW = DIP Switches for selecting LCDVCC and Backlight Signal Inversion J1 = LVDS Flat Panel Connector no. 1 J2 = LVDS Flat Panel Connector no. 2 (not available on ADD2-LVDS-Single). Connector Description PWR connector (4-pole power) Connector type is AMP 2-171826-4.
ADD2-LVDS KTD-00711-D Public User Manual Date: 2008-09-16 Page 8 of 13 LVDS Flat Panel Connector J1 and J2. Connector type is Don Connex C44-40-B-G-1. Mating connector can be Don Connex A32-40-C-G-B-1 (Kontron item no. 910000005). The J1 and J2 connector are identical, but J2 is only available on the ADD2-LVDS-Dual version. Note Max. 0.5A Max. 0.5A Max. 0.5A Max. 0.5A Max. 0.5A 5K6Ω, LCDVCC 110RΩ, 3.3V 3.3V level Max. 0.5A Max. 0.
ADD2-LVDS KTD-00711-D Public User Manual Date: 2008-09-16 Page 9 of 13 Installation Guide Cable kit Available Cable Kits: 821155 Open End LVDS Cable 1080mm 821514 Cable for Sharp LQ121S1LG41 821515 Open End LVDS Cable 540mm 821517 LVDS Cable 2x40p conn 405 mm 821518 Cable for AUO G121SN01 821520 Cable for LG.
ADD2-LVDS KTD-00711-D Public User Manual Date: 2008-09-16 Page 10 of 13 For KT965 motherboard in single - or dual LVDS display configuration. The display connected to the J1 LVDS port can be activated from BIOS by selecting the [CRT+LFP] or [LFP] and the display connected to the J2 LVDS card can not be activated from BIOS, only via Intel Graphics Media Accelerator Driver. The driver for the display connected to J1 can be selected in BIOS.
ADD2-LVDS KTD-00711-D Public User Manual Date: 2008-09-16 Page 11 of 13 Appendix: How to remove LVDS connector Removing the LVDS Cable/Connector used in different types of LVDS Cable Kits like 821517, can easily damage the LVDS connector if it’s not done carefully, like just pulling the cable. The best way to remove the connector is to pull the cable, but with only light force and at the same time move the cable from side to side, meaning from 45º to 90º position compared to normally 0º.
ADD2-LVDS KTD-00711-D Public User Manual Date: 2008-09-16 Page 12 of 13 Appendix: The 820971 LDI Evaluation Kit Consist of: 68700000 LDI (Large Display Interface) module 821521 Evaluation Cable Kit 821517 LVDS Cable 2x40p conn 405 mm The CON1 on the 821521 is based on JAE FI-X30H display connector. As an option it is possible to replace the FI-X30H housing with a FI-E30H housing (using same terminals) and then add support for more displays.
ADD2-LVDS KTD-00711-D Public User Manual Date: 2008-09-16 Examples of Supported Displays and Inverters using LDI Evaluation Kit Using JAE FI-X30H: Display type AUO M170EG01 AUO M190EG01 AUO M190EG02 Boe Hydis HT17E12-200 Fujitsu FLC48SXC8V-11AA LG.Philips LM170E01 Samsung LTM170E5-L03 Samsung LTM170E6-L02 Samsung LTM181E4-L01 Sharp LQ170E1LG11 Sharp LQ190E1LW01 Samsung LTM201U1-L01 Samsung LTM170EH-L01 Samsung LTM170EU-L21 LG.Philips LM201U03 LG.
