User Manual

ADD2-DVI-Dual
KTD-00714-F Public User Manual Date: 2008-11-25 Page 8 of 9
Connector Description
The DVI-I connector is a Molex 74320-1004 (or similar). Only DVI Digital output is supported.
(Both DVI-I and DVI-D cables can be connected).
The DVI-SIL, is a Hirose DF19G-20P-1H. Mating connector is Hirose DF19L-20P-1H or similar.
Pin No. Signal Type Pull Up
1 TMDS Data 2- LVDS OUT
2 TMDS Data 2+ LVDS OUT
3 TMDS Data 2/4 Shield PWR
4 N.C. -
5 N.C. -
6 DDC Clock IO 2K2
7 DDC Data IO 2K2
8 N.C. -
9 TMDS Data 1- LVDS OUT
10 TMDS Data 1+ LVDS OUT
11 TMDS Data 1/3 Shield PWR
12 N.C. -
13 N.C. -
14 +5V (55mA) PWR
15 GND PWR
16 Hot Plug Detect I
17 TMDS Data 0- LVDS OUT
18 TMDS Data 0+ LVDS OUT
19 TMDS Data 0/5 Shield PWR
20 N.C. -
21 N.C. -
22 TMDS Clock Shield PWR
23 TMDS Clock+ LVDS OUT
24 TMDS Clock- LVDS OUT
C1 - C5 N.C. -
Pin No. Signal Type Pull Up
1 GND PWR
2 GND PWR
3 +5V (55mA) PWR
4 Hot Plug Detect I
5 GND PWR
6 DDC Data IO 2K2
7 DDC Clock IO 2K2
8 GND PWR
9 TMDS Clock- LVDS OUT
10 TMDS Clock+ LVDS OUT
11 GND PWR
12 TMDS Data 0- LVDS OUT
13 TMDS Data 0+ LVDS OUT
14 GND PWR
15 TMDS Data 1- LVDS OUT
16 TMDS Data 1+ LVDS OUT
17 GND PWR
18 TMDS Data 2- LVDS OUT
19 TMDS Data 2+ LVDS OUT
20 GND PWR
Shield GND PWR
1 8
9 16
17 24
C1 C2
C3 C4
C5
Front view