User Manual

ADD2-DVI-Dual
KTD-00714-F Public User Manual Date: 2008-11-25 Page 5 of 9
Introduction
• Dual DVI Transmitter each working as Single Transmitter up to 165Mpixels/s
• Panel resolution up to 1920x1200 or similar
• Monitor Detection supported through Hot Plug or Receiver Sense
• DVI 1.0 compliant
• High-speed SDVO1 serial (1G~2Gbps) AC-coupled
• Differential RGB inputs
• Complete Windows and DOS driver support
• Included DVI Cables to implement dual DVI connectors
• DVI Bracket (Full Height) and screws are included for the 820952 ADD2-DVI-Dual
The ADD2-DVI-Dual cards are based on the Silicon Image SiI1364 DVI transmitter. The ADD2-DVI-Dual is
equipped with two SiI1364 and supports two independent displays having resolutions up to 1920x1200
possible. The card is designed for the PCI-Expressx16 connector which on the 986LCD-M family of
motherboards and on the KT965/Flex motherboard is multiplexed PCI-Expressx16 and SDVO. When the
ADD2-DVI card is plugged into the PCI-Expressx16 connector then the motherboard automatically detects
the card and select SDVO output. The card operates at pixel rates of up to 165MHz per link, supporting
1920x1200 panels at a 60Hz refresh rate.
Mechanical Drawing
MB PCB
Measures in mm
45.0
44.0
96.4
MB PCI-Expressx16
DVI-I
DVI-SIL
820952/820958 ADD2-DVI-Dual
12.4
45.0
42.4
96.4
MB PCI-Expressx16
820951 ADD2-DVI-Dual-Internal
42.0
4.1
93.0
Mounting holes diam. 3.0 mm
820955 ADD2-DVI-Dual-lnternal, super low profile 30.0 x 106.0 mm
MB PCB