820152 DC-DC Supply 12Vin 120W KTD-00695-D Public User Manual Date: 2009-11-03 Page 1 of 4 User Manual for the 820152 DC-DC Power Supply 120W 12Vin ATX12V cable kit 12V Input Std.
820152 DC-DC Supply 12Vin 120W KTD-00695-D Public User Manual Date: 2009-11-03 Page 2 of 4 Introduction The 820152 DC-DC Power Supply is a fully compliant ATX power supply designed to power a wide variety of motherboard like the KT690mITX, 786LCD/mITX, 886LCD-M and 986LCD-M families of boards. It has included cable kit inclusive P4-12V cable, as required by the KT690mITX and 986LCD-M families, and it is supporting a wider temperature range than the standard embedded PC range 0 - 60ºC.
820152 DC-DC Supply 12Vin 120W KTD-00695-D Public User Manual Date: 2009-11-03 Page 3 of 4 Installation guide 1. Plug in (press in) the DC-DC Power Supply to the Mother Boards ATX power connector. Please notice that for the KT690mITX and 986LCD-M families: Four pins of the ATX Power Connector are not used, but the connector system is keyed so the DC-DC Power Supply can not be mounted in a wrong position. The ATX connector lock has no effect. ATX12V cable shall be connected. 2.
820152 DC-DC Supply 12Vin 120W KTD-00695-D Public User Manual Date: 2009-11-03 Page 4 of 4 Specifications Input Requirements 12V regulated, +5% / -3%, max=10A (load dependent). Over-voltage shutdown will occur at ~13-13.5V. DC-Jack: Female, panel mount, 2.5 * 5.5 * 10 mm. Voltage outputs Output voltage Max Load / [A] (Fan less) Max Load / [A] (Forced air) 5V 5VSB 3.3V -12V 12V 4,8 1,5 4,8 0,05 6 6 1.5 6 0.05 6 Peak Load / [A] (<60 sec.) 8 2 8 0.1 10 Regulation +/- 1.5% +/- 1.5% +/- 1.
