User's Manual

ReVolution User Manual 1.00 06/09/03 31
PCMCIA Cards
Two PCMCIA slots on the back interface panel accept two Type II PC Cards or one Type III PC Card. You can insert
and remove the cards while the computer is on.
• The peak power consumption of each of the PCMCIA
slots may not exceed 3.3 Watts Peak (600 mA at +5 V).
•
Follow the card manufacturer's instructions in the PC
Card documentation.
• Do not force a PC Card into or out of the slot.
•
Prevent external debris from entering the slot.
•
Make sure that the PC cards all have the legally
prescribed approvals (e.g. IEC/EN 60950).
• The ReVolution has an extended temperature range.
This might be not the case with your PC Card. Please
note that the operating temperature range could be
decreased for the whole system depending on the
manufacturer’s recommended temperature range for
the PC card that you want to use.
To
p
Card Slot
To
p
Card E
j
ector
Bottom Card E
j
ector
To remove a card from the top card slot,
press the top card ejector button.
To remove a card from the bottom card slot,
press the bottom card ejector.
Bottom Card Slot
To insert a PC card, carefully slide the card
right-side up into one of the card slots until
the card clicks.