User's Manual

ReVolution User Manual 1.00 06/09/03 17
Connecting the AC/DC Adapter
When AC is available, connect the ReVolution to the AC power supply with an AC/DC adapter, as described below.
Power On/Off Button
When pressed for ~1/2 second continuously, the system will:
• From Off: Check for valid temperature and then turn on.
• From Suspend: Check for valid temperature and then turn
on.
•
From On: Initiate power off sequence.
When pressed for > 4 seconds continuously, the system:
begins an override function according to the ACPI specification.
The Override Function is useful if the system becomes
unresponsive. It will perform a “hard” shut down.
Connect the locking DC power cord to the
DC voltage socket of the ReVolution.
The other end of the DC power cord
connects into available DC power connector
i.e. cigarette lighter.
The AC voltage socket is on the left
side of the Interface panel.
Connect the female end of the AC power
cord into the AC power adapter.
Plug the male end of the AC power
adapter into an available wall socket.