User's Manual

9
6.5 Connect Power
Risk of product damage!
- Ensure that the power supply voltage
corresponds to the voltage printed on the
back or the underside of the unit.
- Before connecting the AC power cord, ensure
you have completed all other connections.
•
Connect the mains cable to the AC~ socket of
the main unit and then into a mains socket.
(
(
5V
5V
5
5
00mA)
00mA)
(
(
5V
5V
5
5
00mA)
00mA)
(
(
5V
5V
5
5
00mA)
00mA)
(
(
5V
5V
5
5
00mA)
00mA)
HDMI
ARC
HDMI ARC)
OPTICAL
OPTICAL
COAXIAL
COAXIAL
Note:
- If there is no power, ensure the power cord and
plug are fully inserted and the power is turned on.
- Power cord quantity and plug type vary by
regions.
7. General Operation
7.1 Standby/ON
When you rst connect the Soundbar to the mains
socket, the Soundbar will be in Standby mode.
- Press the
button on the remote control to
switch the Soundbar ON.
- Press the
button again on the remote
control to switch the Soundbar back to
STANDBY mode. The POWER indicator will
light up red.
- Disconnect the mains plug from the mains
socket if you want to switch the Soundbar
OFF completely.
7.2 Automatic Power O Function
The Soundbar automatically turns to Standby
mode after about 15 minutes if the TV or the
external unit is disconnected, switched o or the
volume is too close to mute.
• To switch the Soundbar o completely,
remove the mains plug from the mains socket.
• Please turn the Soundbar o completely to
save energy when not in use.
7.3 Select Modes
Press the button repeatedly to select the
COAXIAL, Bluetooth, OPTICAL, HDMI ARC,
USB mode. The indicator light on the front of the
Soundbar will show which mode is currently in use.
• Yellow indicator : COAXIAL mode
• Blue indicator : Bluetooth mode
• Orange indicator : OPTICAL mode
• White indicator : HDMI ARC mode
• Green indicator : USB mode
7.4 Adjust the Volume
• Press the
+
/
－
(volume) buttons on the
remote control to adjust the volume.
• If you wish to turn the sound o, press the
button on the remote control. Press this
button again or press the
+
/
－
(volume)
buttons to resume normal listening.
Note: While adjusting the volume, the status LED
indicator will ash quickly. When the volume has
hit maximum/minimum value level, the status LED
indicator will slowly ash 3 times.
7.5 Select Equalizer (EQ) Eect
While playing, press the SPORT, MUSIC, NEWS,
MOVIE button on the remote control to select
preset Equalizers.
8. OPTICAL / COAXIAL / HDMI
ARC Operation
- Ensure that the Soundbar is connected to
the TV or audio device.
1 Press the
button repeatedly to select the
OPTICAL, COAXIAL, HDMI ARC mode. The
indicator light on the front of the Soundbar
will show which mode is currently in use.
2 Operate your audio device directly for
playback features.
3 Press the VOL
/ buttons to adjust the
volume to your desired level.
Tip: The Soundbar may not be able to decode all
digital audio formats from the input source. In this
case, the Soundbar will mute. This is NOT a defect.
Ensure that the audio setting of the input source
(e.g. TV, game console, DVD player, etc.) is set to
PCM (Refer to the user manual of the input source
device for its audio setting details) with HDMI /
OPTICAL / COAXIAL input.