User's Manual

ManualsBrandskontakt.io ManualsElectronicskontakt.io Card Tag CT18-3Q

Table Of Contents

Use Menual
- User Manual 11

European HQ:

Kontakt.io Inc., Poland

Stoczniowców 3, 30-

709 Kraków, Poland

Kontakt.io Inc. :

222 Broadway

New York, NY 10038

Kontakt.io GmbH

Paul-Lincke-Ufer 39/40

10999 Berlin, Germany

NIP UE No (VAT) PL9452176914

kontakt@kontakt.io

Kontakt.io Card Tag CT18-3Q

User Manual

Turning on/off and maintenance

Device may be turned on/off on demand using switch, which is the only physical switch

in this product. This prevents device from discharging when not used. When turned on

Card Beacon works constantly and is ready to be used in ‘out of the box’ manner. They are

ready to perform since programmed and assembled.

In case of possible malfunctioning users are advised to contact technical support to get

proper replacements (email: support@kontakt.io). The manufacturer and devices’ names

are mentioned on the product label on the beacons’ casings.

Summary of content (4 pages)

PAGE 1
Kontakt.io Card Tag CT18-3Q User Manual Turning on/off and maintenance Device may be turned on/off on demand using switch, which is the only physical switch in this product. This prevents device from discharging when not used. When turned on Card Beacon works constantly and is ready to be used in ‘out of the box’ manner. They are ready to perform since programmed and assembled.
PAGE 2
Installation Slip a lanyard through the holes, put it inside your belongings, or stick your Card Beacon to the wall for the most low profile look a beacon can possibly have. Features ● ● Technology in device: GFSK Power Saving Mode: Card Beacons broadcast less frequently when they don’t move (thanks to motion sensor) or simply switch them off when you don’t use them WARNING Kontakt Card Beacons contain electronic elements and batteries which should be properlydisposed.
PAGE 3
IC Caution: - English: This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions: (1) This device may not cause interference, and (2) This device must accept any interference, including interference that may cause undesired operation of the device. - French: Le présentappareilestconf orme aux CNR d' Industrie Canada applicables aux appareils radio exempts de licence.
PAGE 4
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.