Datasheet

Manufactured by :
CRC Industries Europe NV
Touwslagerstraat 1 – 9240 Zele – Belgium
Tel (32) (0) 52/45.60.11 Fax (32) (0) 52/45.00.34
www.crcind.com
TECHNICAL DATA SHEET
2/2
GRAPHIT 33
Ref. : 20760
When GRAPHIT 33 is used in vacuum equipment, the lacquer must be heated on forehand.
When using GRAPHIT 33 ensure that there is good ventilation. Remove all sources of
ignition.
• A safety data sheet (MSDS) according to EU directive 91/155/EEC and amendments is
available for all CRC products.
5. TYPICAL PRODUCT DATA (without propellant)
Flashpoint
Aerosol : <0°C
Bulk : 11°C
Coverage – calculated (20µm thickness)
Aerosol : ± 0.3m²/200 ml can
Bulk : ±4m²/l
Drying time at room temperature : tack-free <20 min.
cured 4 hours
Dry film properties
Colour : black
Temperature resistance of lacquer : ±90°C
Temperature resistance of graphite film : 250 - 300°C
Surface resistivity : 1000-2000 Ω
(depending on coating thickness, method of application and drying conditions)
6. PACKAGING
aerosol: 12 x 200 ml ; 12 x 400 ml
bulk: 1 Lt; 15 Lt
All statements in this publication are based on service experience and/or laboratory testing. Because of the wide
variety of equipment and conditions and the unpredictable human factors involved, we recommend that our
products be tested on-the-job prior to use. All information is given in good faith but without warranty neither
expressed nor implied.
This Technical Data Sheet may already have been revised at this moment for reason such as legislation,
availability of components and newly acquired experiences. The latest and only valid version of this Technical
Data Sheet will be sent to you upon simple request or can be found on our website: www.crcind.com
.
We recommend you to register on this website for this product so you will be able to receive any future updated
version automatically.
Version : 20760 03 1003 03
Date : 18 October 2004