Data Sheet
CRC Industries Deutschland GmbH
Inustrie-Serviceprodukte
Südring 9 D-76473 Iffezheim Deutschland
Tel (49) (0) 7229 303-0 Fax (49) (0) 7229 303-206
www.crcind.com
TECHNICAL DATA SHEET
1/2
KONTAKT 701
Vaseline Spray
Ref. : 20835
1. GENERAL DESCRIPTION
Pure Vaseline spray used as lubricant and anti-corrosion product.
2. FEATURES
KONTAKT 701 contains pure, white, pasty Vaseline (paraffin oil which hardens to a pasty
consistency at room temperature). The product combines the excellent lubricating and anti-
corrosion properties of Vaseline with the easy use of an aerosol can : clean and firm handling
and storage, mobile and easy, precise dosage.
KONTAKT 701 is compatible with most materials including metal, rubber, wood, leather and
synthetics and elastomers that are resistant to paraffin oil (not polycarbonate, polystyrene
and EPDM).
3. APPLICATIONS
KONTAKT 701, as lubricant and anti-corrosion product, is used for example in the radio- and
electro technology as in the antenna assembly. Screw and clamp connectors are being
sealed and protected by KONTAKT 701. Lubricates slides reliably.
4. DIRECTIONS
Using the extension tube, KONTAKT 701 as a spray can be dosed accurately. The
aerosol can be used in an up-side-down position (360° valve), so hard to reach parts can
also be treated. Shake can before use.
KONTAKT 701 when used as a protective coating against corrosion, should be applied in
relative thick layers. Screw and clamp contacts should be given a coating of approx. 1
mm. As a lubricant although, only a thin film is required.
Many materials, including synthetics, tolerate KONTAKT 701 quite well. For series
production runs however, a compatibility test should always be carried out. With most
elastomers a slight swelling is not critical, provided precise dimentional stability is not
required. KONTAKT 701 is unsuitable for example as a lubricant for polystyrene,
polycarbonate and EPDM rubbers.
KONTAKT 701 spray contains flammable solvents. Don’t use the product on energised
equipment. Wait until all solvents evaporated before switching on equipment (minimum
15 min.).
A safety data sheet (MSDS) according to EU directive 91/155/EEC and amendments is
available for all CRC products.