Certifications 2

UK. EH40 Workplace Exposure Limits (WELs)
ValueComponents Type
400 ppm
No biological exposure limits noted for the ingredient(s).
Biological limit values
Follow standard monitoring procedures.
Recommended monitoring
procedures
Derived no effect levels (DNELs)
General Population
NotesAssessment factorValueComponents
Propan-2-ol; Isopropyl alcohol; Isopropanol (CAS 67-63-0)
Long-term, Systemic, Dermal 2 Repeated dose toxicity319 mg/kg bw/day
Long-term, Systemic, Inhalation 2 Repeated dose toxicity89 mg/m3
Long-term, Systemic, Oral 2 Repeated dose toxicity26 mg/kg bw/day
Workers
NotesAssessment factorValueComponents
Propan-2-ol; Isopropyl alcohol; Isopropanol (CAS 67-63-0)
Long-term, Systemic, Dermal 1888 mg/kg bw/day
Long-term, Systemic, Inhalation 1500 mg/m3
Predicted no effect concentrations (PNECs)
Components
Propan-2-ol; Isopropyl alcohol; Isopropanol (CAS 67-63-0)
Freshwater
Value
140.9 mg/l
Assessment factor
1
Notes
Secondary poisoning 160 mg/kg 30 Oral
Sediment (freshwater) 552 mg/kg
Soil 28 mg/kg
8.2. Exposure controls
Good general ventilation should be used. Ventilation rates should be matched to conditions. If
applicable, use process enclosures, local exhaust ventilation, or other engineering controls to
maintain airborne levels below recommended exposure limits. If exposure limits have not been
established, maintain airborne levels to an acceptable level. Provide eyewash station.
Appropriate engineering
controls
Individual protection measures, such as personal protective equipment
Use personal protective equipment as required. Personal protection equipment should be chosen
according to the CEN standards and in discussion with the supplier of the personal protective
equipment.
General information
Wear safety glasses with side shields (or goggles). Use eye protection conforming to EN 166.
Eye/face protection
Skin protection
When handling the product wear chemical-resistant gloves (standard EN 374). The breakthrough
time of the glove should be longer than the total duration of product use. If work lasts longer than
the breakthrough time, gloves should be changed part-way through. Neoprene gloves are
recommended. Suitable gloves can be recommended by the glove supplier.
- Hand protection
Not available.
- Other
In case of insufficient ventilation, wear suitable respiratory equipment. Chemical respirator with
organic vapour cartridge and full facepiece. (Filter type A)
Respiratory protection
Wear appropriate thermal protective clothing, when necessary.
Thermal hazards
When using do not smoke. Always observe good personal hygiene measures, such as washing
after handling the material and before eating, drinking, and/or smoking. Routinely wash work
clothing and protective equipment to remove contaminants.
Hygiene measures
Emissions from ventilation or work process equipment should be checked to ensure they comply
with the requirements of environmental protection legislation. Fume scrubbers, filters or
engineering modifications to the process equipment may be necessary to reduce emissions to
acceptable levels.
Environmental exposure
controls
SECTION 9: Physical and chemical properties
9.1. Information on basic physical and chemical properties
Appearance
Liquid.
Physical state
Aerosol.
Form
Colourless.
Colour
Alcohol. Solvent.
Odour
SDS GREAT BRITAIN
Material name: ANTISTATIK 100 - Kontakt chemie - Europe
BDS000769AE Version #: 01 Issue date: 09-March-2022
4 / 10