Data Sheet

Manufactered by :
CRC Industries Europe NV
Touwslagerstraat 1 – 9240 Zele – Belgium
Tel (32) (0) 52/45.60.11 Fax (32) (0) 52/45.00.34
KONTAKT CHEMIE Lub Oil 88
Page 2/2
Properties of the lubricating oil after the evaporation of the solvent
Flash point ASTM D 56 160°C
Pour point ASTM D 97 -30°C
Neutralisation value (acid) DIN 51558 T1 0,7 mg KOH/g
Saponification number DIN 51559 2,4 mg KOH/g
Sulphate residue DIN 51575 0,31%
Demulsifying power DIN 51599 non-demulsifying
Corrosive action on copper
Degree of corrosion
DIN 51759 1-100 A24
Corrosive behaviour with respect to
steel
DIN 51585 0-A
Ageing behaviour,
Rise in viscosity
Increase in precipitation
DIN 51586
3%
< 0,05 ml
Mechanical test, FZG gear rig test DIN 51354 T2 Damage power stage
Application instructions:
KONTAKT CHEMIE Lub Oil 88 can be applied by all conventional methods. In the small
aerosol cans it is particularly suitable for servicing applications (tool box). Because of its high
flash point it can be used for conventional lubricating tasks without the need for special
explosion protection measures. However, the product must not be sprayed directly into live
electric circuits or other potential sources of ignition. Further information on safety can be
found in the safety datasheet.
Available:
Aerosol, 100 ml, 200 ml
Bulk 1 l
These values are not intended to be used as specifications. They are based on what we believe
reliable. However it is the user’s responsibility to determine the suitability.