User Manual

KÖNIG & MEYER GmbH & Co. KG
Kiesweg 2, 97877 Wertheim, www.k-m.de
49302-012-55 Rev.04 03-80-111-00 11/12
49302 Headphone Holder
for 19" Rack
Full-swivel holding bracket:
- - place in position for use
- - compact when not required
- rubber-covered, protective surface
- secure and robust steel core
SAFETY NOTES
Thank you for choosing this product. These instructions contain information about
the installation and use of the tablet PC holder. We suggest you keep the
instructions in a safe place for later use.
- Not to be used in external or damp areas.
- Use suitable rack material.
- Vigilant handling required to avoid the risk of pinching.
- When not in use, we recommend folding the bracket back on the rack
INSTALLATION INSTRUCTIONS
1. Clip 2 caged nuts in the rack track at the
1. back of rack, with 76.5mm spacing.
MOUNTING
DIMENSIONS & POSITIONING
Swivel bracket into required position.
Projection only 24 mm – when not in use.
2. Hold the plate on the relevant caged nuts and attach with two
2. suitable screws.
INSPECTION, MAINTENANCE, CLEANING
TECHNICAL DATA
- Check the functioning of the screws regularly.
- For cleaning purposes utilise a slightly damp cloth
- with a non-abrasive cleaning solvent.
FAULT FINDING (F) and SOLUTION (S)
F: Bar swivels at will.
F: S: Rack is not balanced - remedy.
F: S: Plate is at an angle in the track: straighten.
F: Bracket can be removed from the connection plate.
F: S: Are the safety rings missing? Replacements:
F: S: Art.-No.03-12-590-00
F: No more caged nuts and screws?
F: S: Order numbers are included in the information.
Materials
Plate, bracket, safety ring - steel
Sheathing - TPE 089
Distance sleeve - PA-GV
Load Headphones
Dimensions
B x D x H 20 x 153 x 88 mm
(package size: 24 x 149 x 93 mm)
Packing
PE bag with cardboard header:
200 x 270 mm
Flat headed screw DIN85
M5 x 16: 03-05-531-25
M6 x 16: 03-05-361-25
Caged nuts
M5: 03-08-270-00
M6: 03-08-370-00
(same external
dimensions)
Safety ring