User Manual
1
2
3mm
30mm
(1.2”)
(0.12”)
8mm
50mm
(2.0”)
(0.31”)
Use a pencil to mark the place for mounting. Make sure the wall structure
can support the weight of monitor along with the mount. Avoid dead center
for mounting holes.
Use a pencil to mark the place for mounting. Make sure the wall structure
can support the weight of monitor along with the mount. Avoid electricity for
mounting holes.
04
3
Insert the two plastic covers on wall plate for decorative appearance.
Recessed surface installation: Put 4 spacers between faceplate and monitor.
Install 4 screws through faceplate, spacers to monitor via mounting holes.
OR
B
B
A
D