User Manual
Stacker 18952
for Keyboard Stand 18950; adjustable height and angle
Made in Germany
-18952.000.55-
-03.80.792.00- 6/03
1
2
3
4
5
6
7
7
9
10
11
12
10
8
Assembly Instructions
Important: The two attachments can be
mounted at eight different heights, but for
safety reasons they always have to be set
with the same height.
Remove the rear plastic plugs 3 from the
support tubes 2 of the keyboard stand.
Use locking screw 5 to fasten main
tube 6 to cross-bar 4. The height is adjustable
for eight settings: Support arm from a min. of
100 mm to a max. of 400 mm above the
keyboard stand.
Insert cross-bar 4 as far as it will go into the
support tube 2 of the keyboard stand and lock it
with knurled-head screw 1.
Fasten support arm 9 in the desired position on
the main tube 6 using hexagon socket-head
bolt 11, locking disk 7 and spring 8 with
hexagon socket wrench 12.
Adjust the rubber sleeves 10 for the instrument.