User Manual

KÖNIG & MEYER GmbH & Co. KG
Kiesweg 2, 97877 Wertheim, www.k-m.de
13500-000-55 Rev.04 03-79-101-00 1/17
TECHNICAL DATA
SETUP INSTRUCTIONS
13500 Percussion
table
- sturdy and load bearing
- generously sized tray table
- handy operation elements
- variable adjustment of the stand height
- folding legs for compact transportation
- quick assembly - tools are not needed
- Dimensions: Height 700 - 1250 mm,
- tray 573 x 373 x 23 mm, weight: 4.48 kg
SAFETY NOTES
Thank you for choosing this product. The instructions provide
directions to the important setup and handling steps. We
recommend you keep these instructions for future reference.
FUNCTIONS
HEIGHT ADJUSTMENT
19 NOTE:
19 Prior to loosening the clamp screw 10 hold the
19 extension tube in one hand.
10 Loosen the clamping screw of the clamp/bracket;
11 adjust the extension tube to the desired height
12 re-tighten the clamp screw.
TRAY
The tray (internal: 573 x 373 x 23 mm) is generously sized
and provides space for a variety of gadgets. The tray has
three side walls, and the forth front side is open i.e. has an
apron to ensure sturdiness. To protect the instruments the
surface is covered in a closed felt mat.
STAND
1 Remove stand and tray from the box
2 Loosen the adjustment screw a bit,
3 expand the legs until...
4 ...the connecting struts are level.
5 Re-tighten the clamping screw.
5 NOTE: Manual strength is enough; Do not over-tighten
5 the screws it can negatively affect the components.
TRAY
6 Remove the wing nut from the lower plate of the tray,
7 Place the lower plate into the extension tube as far as it
will go
8 Tighten the wing nut more or less: so that the tray
8 movement can be set so that it can be moved easily or
8 that it is held tightly in place.
- The floor must be load bearing and even.
- Installation safety:
- - Center the laptop (weight bearing load)
- - Pull the legs apart (= horizontal struts)
- - Ensure that the music desk is firmly placed on the
--extension tube as far as it goes: particularly after the
--position has been changed.
- The fact that the product is collapsible and adjustable,
- can result in pinching and wedging of fingers and hands.
- Careful and attentive handling during setup, operation
- and disassembly is indispensable.
Material
Tubes, struts, tray: Steel
Brackets, handles, lower plate: Polyamid (PA)
End caps, clamp caps: TPE
Load Perkussion
Box, weight 680 x 140 x 380 mm; 4.48 kg
Dimensions
Tube Combination: ø 30/25 mm
Height: 700-1250mm (max. base-ø 750 mm)
Tray: internal 573 x 373 x 23 mm, t=1,5mm
Accessories
(optional)
Carrying case 11450
Sheet music trays 122a, 12218, 131
Eye glass holder 16050 among others
Magnets 11560, 11580
HEIGHT ADJUSTMENT
TRAY
STAND
DIMENSIONS