User Manual

USAGE NOTES / FUNCTION
DIMENSIONS
External Dimensions, WxDxH: 510 x 1180 x 930 mm
Transport Flat Bed Height: 145 (170) mm
Casters: ø100 mm
Ground Clearance: 120 mm
Handle Tube: ø30 mm
CAPACITY
1 - 12 Orchestra Music Stands
CASTERS
18 2 swivel casters with brakes
19 2 fixed casters
CHECK, MAINTENANCE, CLEANING
- In the event of workstation maintenance pay attention to
- possible risks (wedging…)
- To care for the product use a damp cloth and a non-
- abrasive cleaning agent
FAULT-FINDING (F) and REPAIR (R)
F: Handle tube 2 is not stable
F: R: Check screw connections 7 and
F: R: tighten or replace as needed
F: The trolley tips or does not roll properly
F: R: Check the casters, replace if needed 20
F: R: Check if the surface is suitable
F: Orchestra Music Stands moves back and forth
F: R: Place Orchestra Music Stands (see 9-14) as
F: R: described above
F: R: Place rubberized cable 16, 17
F: R: Place the Orchestra Music Stand as far as they
F: R: will go towards the handle tube 8
DIMENSIONS
KAPAZITÄT
KÖNIG & MEYER GmbH & Co. KG
Kiesweg 2, 97877 Wertheim, www.k-m.de
11935-000-55 Rev.3 03-80-676-00 3/16
TECHNICAL DATA
Material
Tubes, guide rails: Steel, powder coating
Connection elements: Steel, galvanized
Bed: Flat bed
Casters: TPE
Load up to 12 Orchestra Music Stands 11930
Dimensions
W x D x H: 510 x 1180 x 170 (930) mm
Casters: ø100 mm, Ground clearance: 120 mm
Weight 18 kg
Packaging 1230 x 570 x 220 mm
SECURING the LOAD
To avoid unintentional movement of the
load a rubber cable 3 is used to secure the
load.
16 Guide the rubber cable hook into the
16 drill holes on both sides of the side
16 guide rails
17 Secure the cable over both legs and hook it
17 into the hole located on the other guide rail
SECURING the LOAD