Operation Manual

77
English
“TP List”
1. Select the satellite(s). Press the
OK button.
1. Press the red button to open the
“Edit TP” window.
- “Frequency” / “Symbol rate”:
Press the right/left buttons
increase or decrease one step at
the time. Press the digit buttons
to enter the value.
- “Polarity”: Select “Horizontal“ or
“Vertical“. Press the OK button.
1. Press the green button to open
the “Add TP” window.
- “Frequency” / “Symbol rate”:
Press the right/left buttons
increase or decrease one step at
the time. Press the digit buttons
to enter the value.
- “Polarity”: Select “Horizontal“ or
“Vertical“. Press the OK button.
1. Press the yellow button to delete
a transponder.
The following message appears:
“Are you sure to delete?“
2. - Select “Yes” to delete.
- Select “No” to cancel.
1. Press the blue button to open the
“TP Search” window.
2. “FTA Only“: Select “Yes” or “No”.
Press the OK button.
3. “Scan Channel”: Select
“TV+Radio”, “TV Channel” or
“Radio”. Press the OK button.
4. “Network Search”: Select “Yes” or
“No”. Press the OK button.
“System Setup”
“Language”
1. “Language“: Select the language.
2. “First Audio“: Select the
language.
3. “Second Audio“: Select the
language.
4. “Teletext“: Select the language.
“TV System”
1. “Video Resolution“: Select
“1080p_50”, “1080p_60”,
“720p_60”, “720p_50”, “576p”,
“576i”, “480p”, “480i”, “By Native
TV” or “By Source”.
2. “Aspect Mode“: Select
“4:3Letterbox”, “4:3Panscan”,
“16:9 Normal” or “Auto”.
3. “Video Output“: Select “RGB” or
“CVBS”.
4. “Aspect mode“: Select “LPCM
Out” or “BS Out”.
“Display Setting”
1. “Brightness“: Select from 0 to
100.
2. “Contrast“: Select from 0 to 100.
3. “Saturation“: Select from 0 to 100.
4. “Hue“: Select from 0 and 100.
5. “Sharpness“: Select from 0 to 10.
“Local Time Setting”
1. “Region“: Select the region.
2. “GMT Usage“: Select “By Region”,
“On“ or “O ”.
3. “GMT Oset“: Select “On” or “O”.
Note: If you select “On” for “GMT
Usage“, the system will retrieve
the date and time automatically.
The menu items “Date” and
“Time“ become grey.
4. “Summer Time“: Select “On” or
“ O  ”.
5. “Date“: Press the digit buttons to
enter the date.
6. “Time“: Press the digit buttons to
enter the time.