Operation Manual

33
English
DVB-S2 REC11
Digital satellite receiver
Package contents
• Digital satellite receiver
• Remote control (incl. AAA battery)
Description
The digital satellite receiver is a device intended for
the reception of digital satellite programmes using a
satellite antenna.
Front panel
1342
1. Display
2. On/standby button
• Press the button to switch on the
device.
• Press the button again to set the
device to standby mode.
3. Up button
• Press the button to go to the next
channel.
• Press the button to move to a
higher item in the menu.
4. Down button
• Press the button to go to the
previous channel.
• Press the button to move to a
lower item in the menu.
Rear panel
TV
HDMI
13/18V
LNB IN
400mA max.
USB
(5V
---
)
ONOFF
100-240V~
50/60Hz
MAX. 25W
5 610987
5. On/o switch
• To switch on the device, set the
on/o switch to the “I“ position.
• To switch o the device, set the
on/o switch to the “O“ position.
6. Mains cable
• Connect the mains cable to the
mains.
7. Satellite antenna input
• Connect a satellite antenna to the
satellite antenna input using an
antenna cable.
8. USB input
• Connect a USB device to the USB
input using an USB cable.
9. HDMI output
• Connect a TV to the HDMI output
using an HDMI cable.
10. SCART output
• Connect a TV to the SCART
output using a SCART cable.