Owner manual
ENGLISH
35
Picture 5-59
Friendly Reminder: Administrator has full authority
over Main Menu operations and has an authority to
limit common user’s operation.
5.4 Split mode
The model displays 4/8 live images in the sequence of single, 4-split and 9-split modes.
If you enter into 4-split mode, the live images will be displayed in turn CH1~4, CH5~8… and
CH13~16.
If you enter into 9-split mode, the live images will be displayed in turn CH1~9CH10~16.
5.5 PTZ Control
Picture 5-60
Click the [
] icon to enter into [PTZ control] menu shown as Picture 5-60. Now user can
control the camera with Pan, Tilt and Zoom capabilities.
Click [Zoom-/+] button to zoom in/out the image; Click [Focus -/+] button to focus the image;
Click [Iris -/+] button adjust iris to open or close.
How to set pre-set point
¾ Total: set up pre-set point quantity
¾ Cur Point: indicates starting point cruised. System default point is 01. The model supports
up to 255 pre-set points.
¾ Stop time: sets the stop time at each point and range is 1~255;
¾ GOTO: allow you go to a specic preset point.
¾ Set: allow you set a set of specic preset points of a PTZ camera.
1. Select a camera you desire to set a preset point;
2. Adjust the camera in a desired direction;
3. Click [Set] to set the point as preset point;
4. Click [Save] to save the preset point;
5. Follow the above step to add one more preset point.
¾ Save: save all the preset points.
¾ Clean: allow you delete one selected preset point.
Note: Up to 254 pre-sets per one camera can be stored. However, actual preset quantity diers
depending on PTZ performance.