Owner manual

ENGLISH
24
5.2.3.6 Log Search
Go to [Main menuSearchLog] option to
enter into the Log search interface shown as
Picture 5-28.
Herein allow you preview the log information
you have searched. And click [Backup] to
export all the log information which is listed.
For other button functions please refer to
previous section 5.2.3.4-Event Search.
Picture 5-28
Picture 5-29
5.2.4 Network
5.2.4.1 Network set
Click [Main menuNetworkNetwork] to enter into the below interface shown as
Picture5-30.
Picture 5-30
After selecting network mode - such as DHCP, PPPOE
or static allocation- and setting up web ports, you can
visit DVR remotely through a network or internet.
UPnP (Universal Plug and Play) function: If router
supports UPnP function and set <UPnP> to “Enable”,
system will automatically forward port to router.
DNS: DNS server is generally provided by local ISP. Herein please enter the IP address of
yourDNS
Picture 5-31
When selecting DHCP from the Type, A router will
automatically allocate IP address for your DVR. After
restarting each time, the IP address captured by your
DVR may be dierent. So, port forwarding is required
when you visit a remote DVR.
1. Select DHCP and click [Apply] button;
2. Exit and restart DVR;
3. Input media port and HTTP port
4. Set IP address captured by DVR and HTTP port to a router