Owner manual

ENGLISH
15
5.2.1.2 Output mode
Go to [Main menuDisplayOutput] to enter into the output set interface shown as
Picture5-5.
Go to [Main menuDisplayOutput] to
enter into the output set interface shown as
Picture 5-5.
Click [Live] to pop up the interface shown as
Picture 5-6. Now you could perform channel
sequence setting.
Picture 5-5 Picture 5-6
Click [Spot output] option and set relative
parameters shown as Picture 5-7.
Click [Spot sequence] to enter into the
interface shown as Picture 5-8.
Picture 5-7
Picture 5-8
Picture 5-9
¾ Video output: Support CVBS output Live and
Spot mode simultaneously, and Live is main
output, and Spot is auxiliary output.
¾ CH Sequence: the option is defaulted to “O”
and sequence time is 5 second. User can activate
the option as per request.
¾ Rotate time: allow you set sequence time, and
minimum time can be set to 3 seconds.
¾ VGA/HDMI Resolution: allow you select VGA
or HDMI output, including 800x600, 1024x768,
1280x1024, 1440x900 and 1920 x 1080.
¾ Display Mode: Live output: display window will include Single, Quad, 9-split and 16-split
mode.
¾ Spot output: display window will include Single, Quad and 9-split mode.