Owner manual

ENGLISH
14
5.2 Main Menu
Picture 5-2
On <Live> mode, click [Menu] button on the front
panel or Remote controller to enter into Main
menu interface shown as Picture 5-2. And also
you can click [ ] icon to enter the main menu
screen. In Main Menu mode, you can control device
management settings, such as Display, Record,
Network, Search, Device, System and Advanced
setting etc.
5.2.1 Display
5.2.1.1 Live mode
Go to <Main menuDisplayLive> option and enter into the <Display> setting interface
shown as Picture 5-3.
Picture 5-3
Picture 5-4
¾ Channel: allow you setup the channel you
desired.
¾ Name: allow you setup the channel name, and
system support up to eight characters or four
Chinese characters.
¾ Position: allow you setup the display position of
each channel.
¾ Color: Click [Setup] option to enter into the
[Color setup] interface shown as Picture 5-4.
¾ Covert: allow you enable [Live] surveillance
screen
¾ Show time: allow you enable system time
appear in the <Live> screen.
¾ Record time: When set to “Enable”, you are
allowed to record system time into the record
history.
¾ Copy: allow you copy all data of one channel to
any other one
Left picture 5-4 is the Color setup Menu where you
can adjust image brightness, saturation, contrast
and hue parameters of each channel.
Explanation:
1. The modications will be available after clicking [APPLY] button on the bottom of the sub-
menu windows and being prompted to save and then clicking [ok] button.
2. If you want to cancel the modication, click [Exit] button to exit the menu.
3. When clicking [DEFAULT] button, all system default values will be reset to default value.
4. System default value indicates the value pre-set at the factory.