Manual

6
ENGLISH
User instructions:
1. Insert an SD card in the SD card slot of the monitor. Or connect an external hard disk
drive to the USB port of the monitor.
2. Press the power on/o button for about 2 seconds to power on the monitor. The power
indicator should light up and the picture appear.
3. For systems settings press the menu button to open the main menu. The following
screen should appear. Use the navigate, OK and menu buttons to navigate through the
menu.
System
1. Press OK to enter the system settings. The system oers the following options:
Date/Time Set the time and date.
Language Set the language.
Record Mode Set to stop recording or overwrite the rst video record when
the storage medium is full.
Format SD/USB Set to format the storage medium.
Storage for Recording Set the storage medium.
Display Items Set to display RSSI, Time, SD/USB status and camera on the
screen and the recorded video.