Instruction Manual
ENGLISH
3
A connection is automatically established if the CSBTRCVR100 is powered.
If you want to switch from one device to another, follow the steps below:
1. End the existing Bluetooth® connection.
2. The CSBTRCVR100 is now ready to be connected to another device.
3. Follow the instructions “Pairing the CSBTRCVR100” to connect the new
device.
LED indication
Indication Meaning Description
Flash every 5seconds Pairing Searching the device in pairing
mode/waiting for a connection
Constantly switched on Connected CSBTRCVR100 and device are
connected
Troubleshooting
If you do not hear any sound coming from your speakers, check the following:
- make sure the CSBTRCVR100 is powered;
- make sure the audio cable is properly connected to the CSBTRCVR100;
- make sure the volume is correctly set;
- make sure the devices are at a maximum distance of 10metres of the audio
transmitter;
- make sure the Bluetooth® function on your device is activated;
- make sure that there is music playing on your device.