Instruction Manual

ENGLISH
2
Product view
3.5mm male to male
Audio R/L
Audio amplier
Power via adapter (optional)
Power via USB port of your device
Analogue connection
1. Connect the 3.5mm audio cable connector (incl.) to the headphone socket
of the CSBTRCVR100.
2. Connect the second audio cable connector to the input of your audio
system or amplier. (Refer to the manual of the device).
3. Connect the USB cable to the CSBTRCVR100 and to a USB port on your
audio system to power the CSBTRCVR100. You can also use a USB power
adapter (optional).
4. The LED ashes to indicate that the unit is powered and ready to be paired
with your device(s).
Pairing the CSBTRCVR100
To pair you smartphone or tablet with a Bluetooth® enabled device, check the
device manual.
The CSBTRCVR100 has a capacity to store up to 8 devices so you only have to
enter your PIN once.
Reconnecting your device
If you move out of range or turn o the Bluetooth® feature on your device, you
can easily reconnect by opening the Bluetooth® manager and tap the “music
receiver”.