Operation Manual

49
E
CARE AND STORAGE
Cleaning the camera
When cleaning the camera, do not use solvents such as benzene or
paint thinner.
 Before cleaning, remove the batteries from the camera, or disconnect the power
plug of the AC adapter from the wall outlet.
 The exterior casing surface consists of paint and printing. Wiping the casing
with benzene or paint thinner may cause discoloration, or the paint or printing to
be removed.
 If the camera becomes dirty, wipe off the dust with a soft, dry cloth.
For stubborn dirt, dampen a cloth in diluted neutral detergent (kitchen detergent),
wring thoroughly and wipe. When finished, wipe the camera with a dry cloth.
 If using a chemical cloth, follow the safety precautions for the product.
After using the camera
If the camera is not to be used for a long period, remove the batter-
ies and ensure that the power plug of the AC adapter is discon-
nected from the wall outlet.
 Leaving the batteries inside the camera for a long time may cause the battery
fluid to leak, resulting in malfunction of the unit.
 When storing, keep both camera and batteries in a cool place with low humidity
and under a constant temperature as far as possible.
Recommended temperature: 15
0
- 25
0
C (59
0
- 77
0
F)
Recommended humidity: 40% - 60%
About handling the SD Memory Card
 Do not bend or apply excessive force.
 Do not store the card in places with high humidity, in dusty places or where
static electricity or electromagnetic fields are likely to occur.
 Keep dust, water and foreign objects away from the terminal section.
About image data
 Use a PC to delete images and files recorded with other models.
 The recorded data may be lost if you or a third part misuse the SD Memory Card,
if the card is affected by strong static electricity or electrical shock, or during
card malfunction.
Konica will not be responsible in any way for the loss of recorded data or the
consequences of such loss.