KONICA DIGITAL CAMERA Instruction Manual
FCC Statement: Declaration of Conformity Trade name: Konica Model: e-mini Responsible party: KONICA PHOTO IMAGING, INC. Address: 725 Darlington Avenue Mahwar, NJ 07430, U.S.A. Telephone number: 201-574-4000 This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1)this device may not cause harmful interference and (2) this device must accept any interference received, including interference that may cause undesired operation.
Contents English 1. Safety Tips ................................................................................................. 1 2. Parts Identification ..................................................................................... 3 3. Loading Batteries ....................................................................................... 3 Important – Please Read Before You Begin 4. Taking Pictures .......................................................................................... 4 5.
● Warning Symbols and What They Mean WARNING Failure to use the product properly could result in fatal harm to the user. CAUTION Failure to use the product properly could result in minor or moderate harm to the user or in property damage. ● Precautions WARNING • Do not disassemble, modify, or repair the product. • Do not disassemble, short, heat, or incinerate the batteries. CAUTION • Do not splash the product with water or moisten it.
2. Parts Identification Check that the product comes complete with the following components: ● Camera × 1 ● Strap × 1 ● CD-ROM disc × 1 ● USB cable × 1 ● Instruction manual (warranty card) × 1 ● Konica card × 1 ● Parts Identification Shutter button Eyelet for strap Viewfinder LED indicator English Status LCD Select dial LCD Monitor Main switch USB connector Battery cover 3. Loading Batteries 2 Slide the battery cover on the side of the unit towards OPEN.
Battery Exhaustion The LED indicator will change from green to yellow-orange when the batteries are almost exhausted. When this happens, replace the batteries promptly. Important – Please Read Before You Begin ● Battery life Number of pictures about 100 Continuous Playback time about 30 min. Note: The above figures are based on tests carried out by Konica understandard conditions (one picture every 30 seconds, including erase operations).
5. Selecting Modes Use the select dial on the side of the camera to select the required shooting mode. SELECT 1 Set the main switch on the side of the camera to REC. The LED indicator will light green after blinking red. 2 Press the select dial. (Figure 3) “REC MENU” will be displayed on the LCD monitor. (Figure 4) (Figure 3) 3 Turn the select dial to select the required shooting mode in the REC menu.
1 Set the main switch on the side of the camera to PLAY. The last picture taken will be displayed on the LCD monitor. 2 Turn the select dial upward. (Figure 6) The previous images will be displayed successively. SELECT 6. Playing back images (Figure 6) * A movie image will be displayed with a yellow frame. ● Plaiyng back a movie 1 Select a movie with a yellow frame. 2 Press the shutter button to play back the image. (Press the select dial to pause and resume the movie.
● INDEX 1 Press the select dial after selecting INDEX in the PLAY menu. Nine images will be displayed. The currently selected image has a red frame. (Figure 9) 1 2 3 4 5 6 8 9 * A movie will be displayed with a yellow frame. 7 2 Press the select dial after selecting the disired image. The image will be displayed full-screen. (Figure 10) (Figure 9) English 2 (Figure 10) ● ZOOM 1 Press the select dial after selecting ZOOM in the PLAY menu. A blue frame will appear in the center of the image.
● SETUP – LANGUAGE 1 Press the select dial after selecting SETUP in the PLAY menu. SETUP LANGUAGE 2 Press the select dial after selecting LANGUAGE. (Figure 13) DATE & TIME CANCEL 3 Press the select dial after selecting JAPANESE or ENGLISH. (Figure 14) Menus will be displayed in the selected language. (Figure 13) LANGUAGE JAPANESE ENGLISH CANCEL (Figure 14) ● SETUP – DATE & TIME 1 Press the select dial after selecting SETUP in the PLAY menu.
7. Installing Software Note: Check that the operating environment of your computer meets the following requirements. [Operating environment] OS Memory Hard disk space Interface Display Others Windows 98/98SE/2000Professional/Me 32 MB or more 200 MB or more USB 32,000 colors or more, 640 X 480 pixels or more CD-ROM drive 5 Choose [English] and click [OK]. 1 Turn on the computer and insert the CDROM disc. 2 Double-click [My Computer] and then the CD-ROM icon in the window that opens subsequently.
9 Click [Next]. The installer starts. Install e-miniD driver Note: The e-miniD driver must be installed in order to connect the camera to the computer. 0 Click [Continue]. A Click [Cancel]. 1 Double-click the CDROM icon and then the [Konica] folder in the window that opens subsequently. 2 D o u bl e - c l i ck t h e [Setup.exe] icon. 3 Click [Next]. B Click [Finish]. 4 Specify the folder to install and then click [Next]. C Click [Finish]. 5 Click [Start]. The installer starts.
6 Click [OK]. 4 Click [Next]. 5 Click [Next]. Install QuickTime4 Note: The installation of QuickTime4 is required to play back a movie. 2 Double-click the [English] folder. 6 Click [Agree]. English 1 Double-click the CDROM icon and then the [QuickTime] folder in the window that opens subsequently. 7 Click [Next]. 3 Double-click the [QuickTime Installer. exe] icon. 8 Click [Next].
9 Click [Next]. 0 Click [Next]. A Enter the required items and click [Next]. The installer starts. B Click [Close].
8. Connecting to a Computer 1 Open the USB connector cover. 2 Attach the USB cable to the USB connector of the camera and that of your computer. USB connector of your computer USB connector of the camera View images 4 Choose [Digital Camera (TWAIN)] from the menu in the pane on the left. English 9. Working with the Computer 1 Click the Windows [Start] button. 2 Point to [Programs] and choose [MGI PhotoSuite III SE]. 5 Choose [Konica e-miniD] from [1 Choose a camera.] and click [Download].
6 Click [Update]. Photos 7 Click [View] after selecting an image of your choosing. 8 Click Close button. 9 Choose [Photos] in the upper right menu. The image file opens. ● e-miniD driver screen Close button Starts getting a thumnail image. Gets an image into personal computer. Saves an image where you want. Erases an image in the camera. Selects all images. Formats the camera’s memory (all images are erased). Sets the PC camera function* to ON.
View a movie Note: QuickTime4 must be installed. 1~6 Follow the steps described in the previous section, “View Images”. 7 Click [View] after selecting a movie. (The file name of the movie is displayed in yellow.) “e-miniD AVI Player” will activate automatically. 8 Click the start button in the lower left of the window. Playing back the movie will start.
