User's Guide

11
BASIC RECORDING
10
PROCESSING will appear in the LCD
monitor while the recorded image is being
written to memory.
Another picture cannot be taken while
PROCESSING appears on the monitor.
While PROCESSING appears on the
monitor:
- Do not open the battery chamber cover.
- Do not unplug the AC adapter or
disconnect it from the camera.
Your camera can store up to 64 images.
When the camera is full, MEMORY FULL
will appear on the LCD monitor when the
shutter-release button is pressed. If Display
Data is on, F will appear in the frame
counter area.
To reclaim storage space:
- Delete unwanted images (p 20).
- Download images to your computer (see software manual), then
erase all the images on the camera (p 22).
- Erase all the images on the camera (p 22).
1.Slide the record/play switch to
REC.
2.Press the main switch to turn
the camera on.
3.Slide the focus-mode switch
to MACRO or NORMAL.
• Normal: The focus range is approximately
16 inches to infinity (40cm - ∞).
• Macro: The focus range is approximately
6 to 12 inches (15 - 30cm).
4.Frame the image in the LCD
monitor, then press the
shutter-release button.
• The LED on the front of the camera
will glow as the shutter is released.
• When the flash is in automatic mode ,
the flash fires when necessary (p 13).